AVEVA™ PI System™ Feedback Portal

Welcome to our feedback site!


We created this site to hear your enhancement ideas, suggestions and feedback about AVEVA products and services. All of the feedback you share here is monitored and reviewed by the AVEVA product managers.

To start, take a look at the ideas in the list below and VOTE for your favorite ideas submitted by other users. POST your own idea if it hasn’t been suggested yet. Include COMMENTS and share relevant business case details that will help our product team get more information on the suggestion. Please note that your ideas and comments are visible to all other users.


This page is for feedback specifically for AVEVA PI System. For links to our other feedback portals, please see the tab RESOURCES below.

ADD A NEW IDEA

Clear

Ideas

    Showing 12 of 5194

    Modify the Modbus Interface to accept 32-bit Unsigned Ints from the PLC

    provide a data type to accept a 4 byte unsigned integer from the PLC.  At this point, it would be stored in a 64-bit float in PI DA.
    Clint Ramsey over 3 years ago in PI Interfaces / PI Interfaces for Modbus 3 Declined

    remote ingress to EDS

    Enable remote access to EDS OMF endpoint to support deployments where Adapter/OMF application is installed on different host/network to EDS because architecture must fit in with tiered networks for critical asset security. For example remote sites...
    Guest over 3 years ago in Edge Data Store / Ingress 3 Future consideration

    Support multiple Modbus devices on the same machine

    Add support for multiple Modbus devices (using the same IP address but different port numbers) on the same machine. For example, the interface could allow the user to configure something like this: /dn= xxx.xx.xxx.xx:43120,/cn=1,/polldelay=0,/to...
    Guest over 3 years ago in PI Interfaces / PI Interfaces for Modbus 3 Declined

    EDS: OPC DA Connector

    Ability for OPC DA connector to write data to Edge Data Store.
    Guest over 3 years ago in Edge Data Store / Ingress 1 Declined

    Add Mod10 to Custom Data Type Manipulator for Modbus Interface

    Please add support for SquareD Mod10 custom datatype to the Modbus Interface. Schneider Electric uses a custom datatype that uses four 16 bit registers. Each register represents an integer. Each integer is then multiplied by a factor and all resu...
    Guest over 3 years ago in PI Interfaces / PI Interfaces for Modbus 0 No status

    Test Modbus Serial interface with newer Operating Systems

    Currently the Modbus Serial interface supports Windows 7 as the latest possible operating system. Please test the Modbus Serial interface version 4.0.7.61 with operating systems such as Windows 10 or 11. Or release a new Modbus Serial interface th...
    Rachel Morgenroth about 3 years ago in PI Interfaces / PI Interfaces for Modbus 0 No status

    Documentation of EDS Modbus TCP Adapter needs to be updated on removed 32-bit register support for Modbus TCP Adapter

    Challenge: The current version of PI Adapter for Modbus TCP does not any longer support 32-bit Holding/Input registers as this is outside of the Modbus specifications. However, in some cases, 32-bit register values have to be read from 16-bit regi...
    Hans-Otto Weinhold about 2 years ago in Edge Data Store / Ingress 0 Planned

    EDS: Modbus Serial Connector

    Ability for Modbus Serial connector to write data to Edge Data Store.
    Guest over 3 years ago in Edge Data Store / Ingress 1 Declined

    Provide support for Modbus function code 20

    Provide support for Modbus function code 20
    Guest over 3 years ago in PI Interfaces / PI Interfaces for Modbus 0 No status

    POINDexter app be modified such that addresses beyond 64000 can be used

    POINDexter application be modified such that addresses beyond 64000 are able to be ‘tested’ / polled, rather than having to configure a tag to read those registers
    Guest over 3 years ago in PI Interfaces / PI Interfaces for Modbus 3 No status