PI Interfaces

Showing 302

Support dynamic OPC addresses

My OPC server's items have the OPC server node name included in the itemID, for example: serverA.AB_1234.PV. I have redundant OPC servers and redundant interfaces (in failover) and would like the tags to refer to the correct OPC address including ...

Guest almost 2 years ago in PI Interfaces / PI Interface for OPC DA 0 No Status

5 VOTE

Add a watchdog counter to API shared memory

Add a watchdog counter or something similar into the shared memory header. If the counter fails to update, initiate UFO. If PIBufSS crashes, data loss can occur. implement something that allows UniInt to know that the Buffer Subsystem is not re...

Clint Ramsey almost 2 years ago in PI Interfaces / General 1 No Status

5 VOTE

SNMP Interface to support using multiple types of encryption such as DES, 3DES, and AES-128 bit, AES-192 bit, and AES-256 bit.

SNMP Interface should support using multiple types of encryption such as DES, 3DES, and AES-128 bit, AES-192 bit, and AES-256 bit.

Guest almost 2 years ago in PI Interfaces / General 0 No Status

5 VOTE

Assure changes made to any configuration of an interface are audit trailed

We noticed that changes to the configuration of newer interfaces / connectors like - PI EMDVBCS interface 4.0 - PI inbatch interface - PI Connector Wonderware Historian are no longer recorded in the PI Audit trail. (see also TechSupport Case # 9...

Carl Van Laer almost 2 years ago in PI Interfaces / General 0 No Status

5 VOTE

Device Status UniInt health tag should update during runtime without needing a status update

Currently, the device status is updated on startup, on change, on shutdown, and on each performance summary interval. However, for a device status tag created while the interface is running in a good state, the device status tag will remain at 'P...

Guest almost 2 years ago in PI Interfaces / General 0 No Status

5 VOTE

Avoid reloading tags after edits of non-key PI Point attributes

Currently, UniInt-based interfaces will reload a tag if edits are detected on any of the PI Point attributes. This is not ideal as edits to non-key attributes (such as EngUnits) will still cause a tag to be reloaded, potentially leading to data so...

Guest almost 2 years ago in PI Interfaces / General 0 No Status

5 VOTE

Delete mode in Wonderware InBatch interface

When run in delete mode for WWInBatch interface, it uses the data source as the system of record--any open batch in SQL will be deleted. However, as abandoned or done batches are open in WonderWare but closed in PI, the interface may delete batch...

Willy Seah Wei Liat almost 2 years ago in PI Interfaces / Batch Interfaces 0 Declined

5 VOTE

Double check window required when deleting an instance in PI Event Frames Interface Manager

As a PI System Admin, I would like to see a confirmation window (acceptation pop-up message), when deleting Interface instances in PI Event Frames Interface Manager. This would minimize the deletion of the instances by error.

Guest almost 2 years ago in PI Interfaces / Batch Interfaces 0 No Status

5 VOTE

Enhance Visibility of Event Frame Generator/Batch Interface History Recovery Status

Currently when running any event frame generator interface (EFGen, PIFTBatch, etc.) in history recovery mode, there is no way to monitor progress of the actual history recovery. The only way to determine status is to check message logs periodicall...

Guest almost 2 years ago in PI Interfaces / Batch Interfaces 0 No Status

5 VOTE

Batch Interface for Honeywell Experion

We are in need of a PI Batch/AF Events Interface to store data from Honeywell Experion Batch or Honeywell Procedure Analyst into PI Asset Framework.

juergen.b.schmidt almost 2 years ago in PI Interfaces / Batch Interfaces 0 No Status

Please enter your email address

FILTER BY CATEGORY