PI Connector for BACnet

Showing 11

Migration from interface to connector

Would like a way to migrate from interface to connector as easily as possible.

Guest about 2 years ago in PI Connectors / PI Connector for BACnet 2 No status

Add failover capability for the BACnet Connector.

Failover similar to the UFO available for UNIint interfaces. Warm failover would be sufficient, although I'm sure there are some who would like cold and hot as well.

Chris Wozniak about 2 years ago in PI Connectors / PI Connector for BACnet 1 No status

9 VOTE

trend log objects (BACnet object type 20) available from the connector

BACnet trendlog object present the opportunity to buffer at the edge where the data is collected and to gracefully recover from comms outages if data collection has been impacted. I would suspect the trendlog object could be handled similarly to ...

Guest about 2 years ago in PI Connectors / PI Connector for BACnet 0 No status

7 VOTE

Make the connector a BACnet Device (get a BTL listing)

Some devices can only send COV notifications to other BACnet devices. Since the Connector is not a device and does not respond to who-is messages (and does not listen on port 47808), the connector is unable to utilize COV subscriptions for these d...

Paul Kim about 2 years ago in PI Connectors / PI Connector for BACnet 0 No status

2 VOTE

Allow the BACnet Connector to handle responses with an LVT that does not match the request

Currently the BACnet Connector expects devices to respond with the same "Length Value, and Type" (LVT) value as the request. When this occurs the BACnet Connector cannot parse the data in the response. For example: Request from Connector, LVT=1 Re...

Nico Cha 8 months ago in PI Connectors / PI Connector for BACnet 0 No status

6 VOTE

Suppress the creation of "Status Flag" PI Points

The end-user would like to suppress the creation of the "Status Flag" PI Points, as they wish to keep their point count to a minimum due to the license-enforced point limit.

Guest about 2 years ago in PI Connectors / PI Connector for BACnet 0 No status

6 VOTE

Program objects (BACnet object type 16) also bought through by the connector

The program object description is often very useful to understand what the various object instances relate to. At our site the description holds the Asset designation and that would allow correct assignment of the analogue and binary object instan...

Guest about 2 years ago in PI Connectors / PI Connector for BACnet 0 No status

5 VOTE

Log device information when the Connector receives errors from a device

Currently the Connector logs when it receives errors, but does not print information that can be used to determine which device is reporting the errors. We currently need to perform a wireshark trace to look at the individual packets to determine...

Guest about 2 years ago in PI Connectors / PI Connector for BACnet 0 No status

5 VOTE

Distribute-Broadcast-To-Network broadcast for Discovery Tool and Connector

When running the discovery tool from a subnet with no BBMD to query BACnet devices on a separate subnet, it seems like the auto discovery tool is seen as a ‘foreign device’, so the devices do not respond correctly. When analyzing a Wireshark trac...

Guest about 2 years ago in PI Connectors / PI Connector for BACnet 0 No status

1 VOTE

BACnet SC/SuperConnect Support

Support for the BACnet SC/SuperConnect protocol for the PI Adapter, PI Connector, or PI Interface.

Connor Hawkins 9 months ago in PI Connectors / PI Connector for BACnet 0 No status

Please enter your email address

FILTER BY CATEGORY