All ideas

Showing 3270

Add Mod10 to Custom Data Type Manipulator for Modbus Interface

Please add support for SquareD Mod10 custom datatype to the Modbus Interface. Schneider Electric uses a custom datatype that uses four 16 bit registers. Each register represents an integer. Each integer is then multiplied by a factor and all resu...

Guest over 2 years ago in PI Interfaces / PI Interfaces for Modbus 0 No status

6 VOTE

Enhance connection logic to source PI server during Interface startup

When PitoPi Interface starts up, it prints a message saying that it secured a connection with the Target or Host PI server as follows: PIAPI Successfully connected to :5450. Then it begins to load target PI points and it starts looking for t...

Guest over 2 years ago in PI Interfaces / PI to PI Interface 0 No status

6 VOTE

Add functionality to the interface to adjust timestamps by a configurable amount

This enhancement would add the ability to adjust timestamps to the PI to PI Interface (Beyond the included options for clock drift and subseconds). Potentially, a setting could be supplied to change the timestamps on all data transferred by a spec...

Guest over 2 years ago in PI Interfaces / PI to PI Interface 1 No status

6 VOTE

Please add a DAYOFWEEK function to the UFL interface

Can you please add a DAYOFWEEK function to the available functions in the UFL interface. This will greatly assist with the handling of daylight savings transitions (e.g. first sunday in April) as there is currently no easy way of determining the ...

Guest over 2 years ago in PI Interfaces / PI Interface for UFL 0 No status

6 VOTE

UFL Designer should include a test mode to verify INI behavior with a data file.

One can do this, to some extent, piecemeal with functionality the UFL Designer already has. However, it's a very manual process and does not actually have a way to show what data would be sent to PI for a particular file. An explicit test mode or ...

Guest over 2 years ago in PI Interfaces / PI Interface for UFL 0 No status

6 VOTE

Allow OPC DA Output Tags to capture OOO events

Currently there is no way to send corrected values to the OPC DA Server since they are triggered by snapshot. It would be useful if there was a way to alter the values that get sent in case there are substituted/replaced values.

Guest over 2 years ago in PI Interfaces / PI Interface for OPC DA 1 No status

6 VOTE

Automatic restart of the OPC interface whenever OPC server is restarted

whenever the OPC server undergoes any restarts or configuration changes, the OPC interface will delete all old connections, groups, etc. and it will establish a new connection to the OPC server, loading all ItemID's etc (as if it is an automatic r...

Guest over 2 years ago in PI Interfaces / PI Interface for OPC DA 2 No status

6 VOTE

PI interface for OPC .. UA

it would be useful to have an interface that can connect and retrieve data from OPC UA server. it will help to avoid using any additional software for "downgrading" the protocol to OPC at client side.

ValterFostini over 2 years ago in PI Interfaces / PI Interface for OPC DA 2 No status

6 VOTE

Allow https communication between all PI products

No description provided

Guest over 2 years ago in PI Interfaces / General 1 No status

6 VOTE

Upgrade the most commonly used PI Interfaces to use only the Microsoft Visual C++ 2015-2022 Redistributable

Please upgrade the most commonly used PI Interfaces so that the only Microsoft Visual C++ Redistributable version that they require is the 2015-2022 version. This will reduce the size of the install kit, make it faster to download, make it faster ...

Kenneth Barber over 2 years ago in PI Interfaces / General 1 No status

Please enter your email address

FILTER BY CATEGORY