Ideas

Showing 17 of 5194

Modify the Modbus Interface to accept 32-bit Unsigned Ints from the PLC

provide a data type to accept a 4 byte unsigned integer from the PLC. At this point, it would be stored in a 64-bit float in PI DA.

Clint Ramsey over 3 years ago in PI Interfaces / PI Interfaces for Modbus 3 Declined

9 VOTE

Support multiple Modbus devices on the same machine

Add support for multiple Modbus devices (using the same IP address but different port numbers) on the same machine. For example, the interface could allow the user to configure something like this: /dn= xxx.xx.xxx.xx:43120,/cn=1,/polldelay=0,/to...

Guest over 3 years ago in PI Interfaces / PI Interfaces for Modbus 3 Declined

6 VOTE

Add Mod10 to Custom Data Type Manipulator for Modbus Interface

Please add support for SquareD Mod10 custom datatype to the Modbus Interface. Schneider Electric uses a custom datatype that uses four 16 bit registers. Each register represents an integer. Each integer is then multiplied by a factor and all resu...

Guest over 3 years ago in PI Interfaces / PI Interfaces for Modbus 0 No status

5 VOTE

Publish performance metrics

Performance metrics for the PI Server should be published with each release of the product.

Guest over 3 years ago in AVEVA™ PI Server / Help / Documentation / Videos 0 No status

4 VOTE

Create/Update Youtube video about AF Security

The available Youtube videos about configuring AF security are not clear. There should be a video about how to configure and grant the proper permissions to a service account running the PI Analysis Service for a PI System where the AF Server and ...

Guest over 3 years ago in AVEVA™ PI Server / Help / Documentation / Videos 0 No status

3 VOTE

Test Modbus Serial interface with newer Operating Systems

Currently the Modbus Serial interface supports Windows 7 as the latest possible operating system. Please test the Modbus Serial interface version 4.0.7.61 with operating systems such as Windows 10 or 11. Or release a new Modbus Serial interface th...

Rachel Morgenroth about 3 years ago in PI Interfaces / PI Interfaces for Modbus 0 No status

3 VOTE

Document and have a dialouge that informs the user that Analysis backfilling does not observe compression settings.

Currently when backfilling an analysis with the PI Buffer Subsystem turned on, all values are sent to the PI Data Archive uncompressed. This is because values are perceived as out of order and these settings are not observed. This should be mentio...

Guest over 3 years ago in AVEVA™ PI Server / Help / Documentation / Videos 0 Declined

3 VOTE

Add information about analyses are handled in derived templates and overriding templates

So there is absolutely nothing in the PSE user guide about how analysis templates are handled in derived templates. And while it appears that it is possible to override an analysis in the base template by creating one with the same name, there is ...