AVEVA™ PI System™ Feedback Portal

Welcome to our feedback site!


We created this site to hear your enhancement ideas, suggestions and feedback about AVEVA products and services. All of the feedback you share here is monitored and reviewed by the AVEVA product managers.

To start, take a look at the ideas in the list below and VOTE for your favorite ideas submitted by other users. POST your own idea if it hasn’t been suggested yet. Include COMMENTS and share relevant business case details that will help our product team get more information on the suggestion. Please note that your ideas and comments are visible to all other users.


This page is for feedback specifically for AVEVA PI System. For links to our other feedback portals, please see the tab RESOURCES below.

ADD A NEW IDEA

Clear

Ideas

    Enhance the OPC DA interface to avoid mixing polled and advise tags on the same scan class

    The interface does not log any informational messages about polled and advise tags getting mixed up on a scan class. Currently it would detect that polled tags are part of scan class 1 and reject it and print the following: E 13-Apr-16 17:26:18 ...
    Guest almost 4 years ago in PI Interfaces / PI Interface for OPC DA 0 No status

    Write event when data source is offline

    As a PI admin I would like the OPC UA connector to write a value such as 'disconnected' when the data source is offline so that I know when the connector is unable to connect to the data source,
    Guest almost 4 years ago in PI Connectors / PI Connector for OPC UA 3 Declined

    Need to start/stop individual data sources

    When going in the PI Connector Admin page in the data sources page, we cannot start/stop individual data sources listed when there is more than one. To stop one you need to stop all the data sources listed.
    Guest almost 4 years ago in PI Connectors / PI Connector for OPC UA 2 No status

    Give the ability upload different Tag Naming files in DCM / OPC UA Connector

    When uploading a "Tag Naming" file in DCM, this file completly replace the existing Tag naming. It mean that a Tag naming file must be done for all datasources within one connector. It would be a lot more easy when dealing with a large number of t...
    Fred_EYRAUD almost 4 years ago in PI Connectors / PI Connector for OPC UA 2 No status

    SNMP Interface to support using multiple types of encryption such as DES, 3DES, and AES-128 bit, AES-192 bit, and AES-256 bit.

    SNMP Interface should support using multiple types of encryption such as DES, 3DES, and AES-128 bit, AES-192 bit, and AES-256 bit.
    Guest almost 4 years ago in PI Interfaces / General 0 No status

    PI Interface for Foxboro I/A 70 Series should support Windows 2016 and I/A Version 9.4

    The PI Foxboro Interface should support the new Foxboro platform on Windows Server 2016 and I/A Version 9.4.
    neuhach1 almost 4 years ago in PI Interfaces / Other Interfaces 3 Evaluating

    Allow sending data to the OPC UA Server

    Currently the Interface is supporting read only. Sending data is also required
    meierke1 almost 4 years ago in PI Connectors / PI Connector for OPC UA 4 Declined

    PI OPC UA Connector - point attribute based configuration

    We are just starting the first tests with PI OPC UA Interface. We notice that the classic method of tag configuration, known from the interface, is no longer possible. This is probably due to the connector concept. Unfortunately, this does not fit...
    Guest almost 4 years ago in PI Connectors / PI Connector for OPC UA 0 No status

    Modify the Modbus Interface to accept 32-bit Unsigned Ints from the PLC

    provide a data type to accept a 4 byte unsigned integer from the PLC.  At this point, it would be stored in a 64-bit float in PI DA.
    Clint Ramsey almost 4 years ago in PI Interfaces / PI Interfaces for Modbus 3 Declined

    For PItoPI interface having a source PI-HA collective, allow failover on source automatically.

    This enhancement would allow the PItoPI interface to treat a source PI collective as a collective, rather than requiring PItoPI failover to be specified for collective members.
    Heather Boehler almost 4 years ago in PI Interfaces / PI to PI Interface 3 Tell us more