All ideas

Showing 4921 of 4921

Always use arc_append when archiving data using SIPowerTG interface

This is the interface from the Siemens Power TG EMS system. The problem is with the saving of Alarm and Event text messages. There are instances when the data files are produced out of order. When data is sent out of order the interface seems to g...

Guest over 2 years ago in PI Interfaces / Other Interfaces 0 No status

1 VOTE

Offset timestamps send by PI Interface for Environmental Systems Corp StackVision

Please allow the option to offset data sent by the interface. This will enhance the ability to compare time stamps between data sources and the PI Server in different timezones.

Guest over 2 years ago in PI Interfaces / Other Interfaces 2 No status

1 VOTE

Name support in BACnet Network Discovery Tool

Can you remove the restriction to use only an IP address in the BACnet Network Discovery Tool? The interface will correctly load and poll tags to a network device referenced by name instead of IP, however the Discovery Tool has the limitatio...

Kenneth Reiss over 2 years ago in PI Interfaces / Other Interfaces 0 No status

1 VOTE

Emerson Ovation Interface: Enable the extraction of the full 32-bit overpacked digital tag as opposed to the now max of 16-bit

Customer would like to extract the full 32-bit overpacked digital tag into an int32 pi point.

Guest over 2 years ago in PI Interfaces / Other Interfaces 0 Declined

1 VOTE

Consistent Naming Convention for the UniInt Health Points Across Versions for the SNMP Interface

The health point names for the Read_Only 1.6.8.1 SNMP Interface have a different naming convention than the health points for Read-Write SNMP Interface 1.5.1.306. In order to keep monitoring consistent across version upgrades, the suggestion is to...

Guest over 2 years ago in PI Interfaces / Other Interfaces 0 No status

1 VOTE

SNMP Interface outputs a .txt file that includes the SNMP devices that are timed out

For the SNMP Interface, the suggestion would be to have the interface output a .txt file that includes the SNMP devices that have lost connection with the interface. This could be useful when there is a high volume of SNMP devices that connect to ...

Guest over 2 years ago in PI Interfaces / Other Interfaces 0 No status

1 VOTE

Quindar interface should allow tracing of values from the data source for a specified PI point.

The PI Interface for Quindar SCADA should have an option to log all values and timestamps from the data source (Prior to any processing by UniInt) for a specified PI point.

Guest over 2 years ago in PI Interfaces / Other Interfaces 1 No status

1 VOTE

OPC Alarms&Events interface should allow to change fields pipe delimiter for PI points

When using a single PI tag, the fields are delimited by the pipe (|) symbol by default. It would be useful to change it to another delimiter or a combination of others. There could be messages containing this pipe (|) symbol, which would make it ...

Carlos Sola over 2 years ago in PI Interfaces / Other Interfaces 0 No status

1 VOTE

Allow modification of "head_end" in piscc.ini to modify naming convention for elements and tags.

When our EEAMAS Interface was originally implemented, the Head_End parameter was set to "Elster", the vendor name for our meters. So all of our meters from that interface are named Elster_xxx. Elster was purchased by Honeywell, so the name no long...

Guest over 2 years ago in PI Interfaces / Other Interfaces 0 No status

1 VOTE

Support capture of instrumentation values, such as "voltage" in the EEAMAS interface.

We are using this interface to capture meter attributes and measurements. However, the voltage comes in the XML files as an "instrumentation value", which is not currently supported. We would like to bring the voltage into a tag for the meter to u...

Guest over 2 years ago in PI Interfaces / Other Interfaces 0 No status

Please enter your email address

FILTER BY CATEGORY