My subscriptions: PI Connector for OPC UA

Showing 53

PI OPC UA Connector Array support

Add reading capability for OPC UA Arrays. Currently items with “ValueRank“ = 1 are ignored.

Guest about 2 years ago in PI Connectors / PI Connector for OPC UA 11 No status

Check history of data discovery in the OPC UA Connector for a data source

Need the option to check historical data discovery dates and times from an OPC UA Connector's data source. There is a Last Discovery performed in the DATA SOURCE TOOLS, however, we should be able to see all of the "Last Discovery" of the data source.

Adam Paranick 8 days ago in PI Connectors / PI Connector for OPC UA 0 No status

8 VOTE

OPC UA - Add Option to not browse item before creating a monitored item

Need an option in Tag only Mode to force connector to create a monitored item without browsing item. Some OPC servers require creating a monitored item BEFORE the item can be browsed.

JTWhite 3 months ago in PI Connectors / PI Connector for OPC UA 0 No status

32 VOTE

OPC UA: Set PI Tag Zero and Span Based on OPC UA Range

For OPC UA Analog Items, the OPC UA standard mandates an EURange property and an optional InstrumentRange property. These Range properties contain a Low and High field.The PI Connector for OPC UA should have an option to use either of these Ranges...

Guest about 2 years ago in PI Connectors / PI Connector for OPC UA 0 No status

28 VOTE

OPC UA Historical data recovery

The PI OPC UA connector can manage historical data recovery when connection is lost between the OPC UA server and the connector, but if the connection problem is between the OPC UA server and the data source on field, when connection is recovered ...

JavierCastane about 2 years ago in PI Connectors / PI Connector for OPC UA 4 No status

2 VOTE

A progress bar during data discovery

It would be great to have some indication of how far the Connector is through the data discovery process.

David Scott about 2 months ago in PI Connectors / PI Connector for OPC UA 0 No status

26 VOTE

Need to start/stop individual data sources

When going in the PI Connector Admin page in the data sources page, we cannot start/stop individual data sources listed when there is more than one. To stop one you need to stop all the data sources listed.

Guest about 2 years ago in PI Connectors / PI Connector for OPC UA 2 No status

26 VOTE

Give the ability upload different Tag Naming files in DCM / OPC UA Connector

When uploading a "Tag Naming" file in DCM, this file completly replace the existing Tag naming. It mean that a Tag naming file must be done for all datasources within one connector. It would be a lot more easy when dealing with a large number of t...

Fred_EYRAUD about 2 years ago in PI Connectors / PI Connector for OPC UA 2 No status

25 VOTE

PI OPC UA Connector - point attribute based configuration

We are just starting the first tests with PI OPC UA Interface. We notice that the classic method of tag configuration, known from the interface, is no longer possible. This is probably due to the connector concept. Unfortunately, this does not fit...

Guest about 2 years ago in PI Connectors / PI Connector for OPC UA 0 No status

21 VOTE

OPC UA Connector Trend Advise Option

OPC UA Connector Trend Advise Option, such as in the UniInt interfaces

Guest about 2 years ago in PI Connectors / PI Connector for OPC UA 5 No status

Please enter your email address

FILTER BY CATEGORY